Welcome to AGIR-BROKK
New Products
Wings
Backplates
Lights / HID
Lights / LED
Cylinder Acc.
Reels
Spools
Dry Suit Acc.
Dry Suit Inflation
Accessories
Deco
Gas Equipment
Hoses
Manuals
Demo Days

By removing the eyelet in the harness webb and let it run below the trimming holes, the single tank adapter is better held in position and doesn't "ride" on more than one eyelet.

 

Slot angled after shoulder provides better comfort and less wear.

 

 

Rounded corners improve both ergonomics and aesthetics.

 

 

Part No: BP44

This is an exact copy of the BP28 but made out of thicker steel for divers who need the extra weight.

BP44 made of 5mm stainless steel 2343 / 316.

4,4 kg

 

Part No: BP51

This is an exact copy of the BP28 but made out of thicker steel for divers who need the extra weight.

BP51 made of 6mm stainless steel 2343 / 316.

5,1 kg

 

Part No: BPALU

This is an aluminium version of the backplates above. The only thing differing, apart from it being of aluminium, is the surface treatment. The aluminium backplate undergoes anodic coating.

BPALU made of 3mm aluminium.

 

 

Part No: STA/STA2

Single tank adapter

Weight 0,4 kg.

 

40 or 50mm crutchband

40mm (1,5") saves the suit from wear and tear and is more comfortable. We have the Tri-glide and the D-ring for this strap specially made for us, to get the same height of the eye as the 50mm / 2" D-ring has.

This makes it very easy to clip accessories to.

 

 

Left shoulder D-ring holder 

 

 

 

Backplate 28

Our BP 28 (weight 2,8 kg) is made of 3mm stainless steel (acidproof 2343/316). It is surface treated/finished by blasting with both sand and glass. The edges and slots are carefully evened and all holes countersunk.
The backplate are cut in a shape that matches our wings perfectly.
All holes, both in the centre recess and on the edges provides for Your personal configuration and optimum trim.
Both the bend of the plate, its angled slots and rounded lower corners enhance the ergonomics of which importance heavy gear is a reminder.
The one piece harness comes with 5 D-rings and is fully adjustable.


 


AGIR plate pocket is designed for both additional storage and soft padding of the backplate. It´s made of rugged cordura-material with an added layer of soft 3 mm neoprene, making it steady and comfortable. When attached to the backplate with its four screws and nuts, there´s room for an SMB or OLT to be stored. Screws and nuts are in stainless steel.

The plate pocket opening seals with velcro. By letting part of the deco buoy loop pass through the velcro lock, stored gear will remain in place and you may still pull it out with real ease.

 

 

 

Part No: CB-SS

Stainless steel version of the standard cam buckle.

 

 

Part No: CB-ALU

Aluminium version of the standard cam buckle.

 

 

 SHW-P

Star hand wheels. Accessory nuts for replacing the standard wing nuts.

Matt finish, high impact resistant.

Thread insert, M8 of stainless steel.

Lightweight yet very strong. 

Max 22mm bolt lenght out from backplate.  

 

 

 

SHW-SS

 Star hand wheels. Accessory nuts for replacing the standard wing nuts.

All stainless steel (M8) 

Max 15mm bolt lenght out from backplate.

 

 

 

 

Single Tank Adapter Part No: STALW

Weight 110 gr.

A lightweight alternative primarily for travelling.
They are made of aluminium and when all edges and slots have been evened, they undergo anodic coating.
The screw and wing nut are in stainless steel.
Bands (2 needed) are not included.

 

 

Short Backplate

H 360mm W 255mm

 

 

 

 

 

 

 

 
Last updated
2008-06-06 17:36